1 #NEO FreeRunner Bike Holder. OpenSCAD model + STL ready for printing
3 ![NEO FreeRunner Bike Holder](https://shalnoff.com/pics/2021/NEO_Bike_Holder/bike_holder__1.png)
4 ![NEO FreeRunner Bike Holder](https://shalnoff.com/pics/2021/NEO_Bike_Holder/bike_holder__2.png)
5 ![NEO FreeRunner Bike Holder](https://shalnoff.com/pics/2021/NEO_Bike_Holder/bike_holder__3.png)
6 ![NEO FreeRunner Bike Holder](https://shalnoff.com/pics/2021/NEO_Bike_Holder/bike_holder__4.png)
8 the holder is equipped with a recess for an additional LiPo battery, a power conversion module DC-DC Boost to 5v, a charging module and a LED light.
10 The holder is split into 2 halves and fastened with two bolts (3x50mm)
14 Switching between the halves
19 To switch off the split into parts
23 To change the tilt (15 degrees by default)
27 ![NEO FreeRunner Bike Holder](https://shalnoff.com/pics/2021/NEO_Bike_Holder/neo_bike.jpg)
31 Copyright © 2021 Dmitry Shalnov [interplaymedium.org]
33 Licensed under the Apache License, Version 2.0 (the "License");
34 you may not use this files except in compliance with the License.
35 You may obtain a copy of the License at
37 http://www.apache.org/licenses/LICENSE-2.0
39 Unless required by applicable law or agreed to in writing, software
40 distributed under the License is distributed on an "AS IS" BASIS,
41 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
42 See the License for the specific language governing permissions and
43 limitations under the License.